เจิ้งโจว ชูลี่ เครื่องจักร บจก. บจ
+8617324840543
ประเภท
ติดต่อเรา
  • โทร: +8617324840543
  • อีเมล:dana@cntaizy.com
  • เพิ่ม: ห้อง 605 อาคาร 1 Jingkai Plaza ถนน Hanghai East และถนน Ninth เขต Guancheng เมืองเจิ้งโจว มณฑลเหอหนาน ประเทศจีน
เหล็ก   เล็บ   การทํา   เครื่องจักร
video

เหล็ก เล็บ การทํา เครื่องจักร

This steel nail making machine can use scrap materials or finished round materials. Nail making is automatically fed and the nail tips and caps are completed in one go. Fast speed, high efficiency and good continuous performance.

ส่งคำถาม
  • คำอธิบาย
    ผลิตภัณฑ์ คําอธิบาย

    นี้ เครื่อง ใช้ อิสระ นวัตกรรม เพื่อ ส่งเสริม ความคืบหน้า ของ เล็บ ทํา ดังนั้น ที่ ทุก เล็บ ผลิต เป็น ของ สูง คุณภาพสูง จาก กลไก โครงสร้าง% 2c มัน กําจัด ปรากฏการณ์ ของ ยาว และ สั้น เล็บ% 2c บางส่วน หมวก% 2c เล็บ หมวก ที่ มี เล็ก กว่า จมูก 2c และ งอ เล็บ ปรับปรุง การผลิต ประสิทธิภาพ% 2c กับ สูง พลังงาน ประหยัด% 2c ต่ํา การสูญเสีย% 2c และ ต่ํา ใช้ ค่าใช้จ่าย ของ เล็บ ตัด และ เล็บ แม่พิมพ์% % 2c อย่างมีประสิทธิภาพ ลด การผลิต ต้นทุน

    Steel Nail Making Machine

    ผลิตภัณฑ์ ข้อมูลจําเพาะ
    หน่วย SL-5C SL-4C SL-3.5C SL-3C เอสแอลทูซี SL-1C
    M1 ใหญ่ เส้นผ่านศูนย์กลาง มิลลิเมตร 5.0 4.5 3.1 3.7 2.8 1.6
    M1 ขนาดเล็ก เส้นผ่านศูนย์กลาง มิลลิเมตร 3.1 2.8 1.8 2.0 1.2 0.9
    M1 ใหญ่ ยาว มิลลิเมตร 130 100 75 90 50 25
    M1 เล็ก ความยาว 80 50 30 40 16 9
    การออกแบบ เอาต์พุต ชิ้น% 2fm 220 260 280 280 300 450
    มอเตอร์ พลังงาน กิโลวัตต์ 5.5 4 3 3 2.2 1.5
    น้ําหนัก 2000 2500 1100 1000 950 800
    โดยรวม ขนาด มิลลิเมตร 2600×1600×1650 2000×1400×1400 1700×1300
    ×1400
    1500×1300
    ×1200

    Steel Nail Making Machine

     

    คุณลักษณะ

    1. คู่ เจาะ คู่ die เล็บ หมวก is more สวยงาม

    % c2% a0 % c2% a0 No chip inclusion% 2c greater reduction of wear and tear of abrasives

    2. สูง ความแม่นยํา% 2c เล็ก จังหวะ% 2c ต่ํา เครื่องมือ การบริโภค
    % c2% a0 % c2% a0The single knife can cut more than 10 million times
    % c2% a0 % c2% a0Simple เครื่อง การปรับ% 2c ประหยัด เวลา และ ความพยายาม

    Steel Nail Making Machine
    ประโยชน์

    A เต็มที่ อัตโนมัติ เลียนแบบ ไต้หวัน ฉีดน้ํามัน ทําเล็บ เครื่อง มี ต่อไปนี้ ข้อดี% 3a
    1. เครื่อง adopts a ลูกสูบ โครงสร้าง ถึง ให้แน่ใจว่า สูง ความเร็วสูง% 2c ต่ํา เสียงรบกวน% 2c เสถียร คุณภาพ% 2c และ ใช้งานง่าย
    2. It adopts an advanced electronic control system, saving 30% of electricity. One machine has multiple functions. It can not only produce ordinary nails, round nails, and threaded nails but also heat-insulating nails and special-shaped nails of various sizes!
    3. เครื่อง นี้ มี ลักษณะ ของ สม่ําเสมอ ให้อาหาร และ a สูง เล็บ เอาท์พุท อัตรา

    หลัก สวมใส่ ชิ้นส่วน ของ อุปกรณ์ 3a เป็น แม่พิมพ์% 2c เล็บ เครื่องตัด% 2c และ เจาะ

    Steel Nail Making Machine
    งาน โครงสร้าง

    (1) โหมดคู่ คู่เจาะ โครงสร้าง ขึ้น มีเสถียรภาพ

    1. Even if the nail rods are not cut neatly, the top hat can still be cut correctly.
    2. ด้านบน หมวก คือ ไม่ ธรรมดา ใหญ่, it is มาก ใหญ่
    3. มี มี ไม่มี รอยขีดข่วน เครื่องหมาย บน ด้านบน cap, มั่นใจ the consistency ของ เล็บ หมวก และ ทําให้ มัน เพิ่มเติม สวยงาม.
    4. The diameter and thickness of the nail caps are uniform, and there is no phenomenon of thick edges and thin edges.
    5. กลวง การออกแบบ ของ เล็บ แม่พิมพ์ มี ไม่ ขนาดเล็ก หมวก% 2c no ฝุ่น บล็อก% 2c no cap clamping% 2c no cracking% 2c และ no need to บ่อยครั้ง รื้อถอน แม่พิมพ์

    (2) เล็บ มีด ส่วนที่เหลือ สวิง บาร์ โครงสร้าง % e2% 97% 8fLow สวมใส่

    1. ขนาดเล็ก จังหวะ และ ต่ํา เชิงกล สวมใส่
    2. High precision, the nail cutter can cut without touching, and the tool loss is low
    3. The number of cuts with a single knife reaches more than 10 million times, and the adjustment can be updated
    บันทึก เวลา และ ปัญหา

    (3) การให้อาหาร และ ลวด ถอน โครงสร้าง % e2% 97% 8f ดี คุณภาพ

    1. ความแม่นยําสูง การให้อาหาร อุปกรณ์ การควบคุม ความยาว ข้อผิดพลาด ของ แต่ละ เล็บ ภายใน % 7b% 7b2% 7d% 7d 3mm
    2. ไม่ซ้ํากัน รวมกัน ของ ลวด ให้อาหาร และ ลวด ถอน แต่ละ เล็บ ผ่าน สาม กล การกระทํา ของ ลวด ให้อาหาร% 2c ตัด% 2c และ ลวด ถอน ถึง สมบูรณ์ แยก เล็บ เศษ จาก เล็บ เพลา ถึง มั่นใจ คุณภาพ

     

    Steel Nail Making Machine

    บริษัท โปรไฟล์

    ก่อตั้งขึ้น ใน 2011% 2c เจิ้งโจว Shuliy เครื่องจักร Co.% 2c Ltd มี เสมอ ยึดมั่น การพัฒนา แนวคิด ของ สิ่งแวดล้อม การป้องกัน% 2c มุ่งมั่น เพื่อ วิจัย ของ รีไซเคิล เครื่องจักร

    So far, we have produced more than 30 kinds of recycling machines, including plastic granulator machines, egg tray machines, copper wire recycling machines, shredder machines, etc. We always focus on quality throughout the whole process of production and services.

    ใน นอกจากนี้, Shuliy has a group of professional technical and sales teams, who concentrate on provideing customers with a complete set of production programs, giving full play to the economic value, use value, and environmental protection value of the machine, and helping earn more benefits for customers. At present, Shuliy machines have been exported to the United States, Canada, Australia, Malaysia, Indonesia, South แอฟริกา% 2c และ อื่น ๆ ประเทศ ใน อนาคต% 2c Shuliy กลุ่ม จะ เป็น เสมอ สร้าง เพิ่มเติม มูลค่า ร่วมกับ คุณ

    ด้วย ไม่ซ้ํา เอฟเฟกต์ ของ สูง ระบบอัตโนมัติ% 2c และ เสถียร และ เชื่อถือได้ ประสิทธิภาพ% 2c บริษัท มี ชนะ ความไว้วางใจ และ ดี การประเมินผล ของ หลาย ลูกค้า

    Steel Nail Making Machine

    ป้ายกำกับยอดนิยม: เหล็ก เล็บ การทํา เครื่อง% 2c จีน เหล็ก เล็บ การทํา เครื่องจักร ผู้ผลิต% 2c ซัพพลายเออร์, เครื่องจักรทำที่แขวนเสื้อผ้า, เครื่องโลหะ

(0/10)

clearall